Hamilton Beach Revolution Serie Manual De Instrucciones página 10

Operation
Blending
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
The blender is designed for mixing frozen
beverages and desserts. Do NOT blend hot
mixtures in the blender!
Blending
NOTE: Before you use the blender for the first
time, wash and sanitize the container and cover
(see Cleaning Instructions).
The blender can operated manually, or as part of a
programmed cycle. For details on use with
programmed cycles, see "Automatic Cycles".
To operate the blender manually, proceed as
follows:
1. Remove the ice chute.
2. Place the ingredients to be blended in the
container.
3. Place the cover and filler cap on the container.
4. Make sure the main power switch is in
the ON ( I ) position.
PULSE
button
10
wWARNING
Cut Hazard
Always make sure splash shield is in place
when blending.
Do not put hands, spoons or other utensils
in jar when blending.
Failure to follow these instructions can
result in broken bones, cuts or other injuries.
5. Place the container onto the base. Make sure it
is securely seated. If the container is not
properly seated, the jar pad sensors (if enabled)
will not allow the blender to start and an error
message will be displayed when the PULSE
button is pressed.
6. Press and hold the PULSE button on the
control panel. The display will show the
following message:
HAMILTON BEACH
COMMERCIAL
PULSING...
7. Once the beverage or dessert has reached the
desired consistency, release the PULSE button.
8. Remove the container to serve.
9. Clean the container as directed in "Care
and Cleaning."