Display
OUTPUT jack
Internal mic
Installing the batteries
Slide off the back cover of the GA-50 to open the battery
compartment. Making sure to observe the correct polarity,
insert the batteries, and then slide the back cover to close
the battery compartment.
If the unit malfunctions and you are unable to correct
the problem by turning the power off and on several
times, remove the batteries and then reinstall them.
When the batteries becomes depleted, a battery indicator
(
) will appear on the display. Immediately replace the
battery with a new one.
You can use the stand provided on the back of the GA-50 to
tilt it back at an angle for easy viewing.
Parts of the GA-50
Tuning guide
Using the stand
SOUND button
a.
GUITAR/BASS indicator
b.
Note name
c.
Flat indicator
Meter
d.
-2-
(Power) button
GUITAR/BASS
button
Speaker
FLAT button
INPUT jack