Parts Of The Pitchblack X; Installing The Battery - Korg Pitchblack X Manual Del Usuario

Parts of the Pitchblack X

AC adapter
(9 V, ,
600 mA or greater,
sold separately)
E ect unit,
guitar amp, etc.
BYPASS jack (mono)
Note name
Battery cover
Battery snap

Installing the battery

1. Open the battery cover located on the back side of the
Pitchblack X.
2. Attach the battery snap to the battery, making sure that the
polarities are correct.
3. Place the battery in the case, and then close the battery cover.
When the battery power is low, the note name display blinks.
Replace the battery with a new one as soon as possible.
DISPLAY/BRIGHT button
CALIB button
DC 9V IN jack
display
DC 9V OUT jack
DC cable
(commercially available)
Tuning LED meter
INPUT jack (mono)
Tuning guide
LEDs
TUNER ON/OFF switch
BUFFERED/TRUE BYPASS switch
3
To e ect pedal
(max. 200 mA)
Guitar or
other
instrument