Connecting The Unit To Other Devices - Yamaha MusicCast YAS-306 Manual De Instrucciones

Ocultar thumbs Ver también para MusicCast YAS-306:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connection method 2: Connect the unit to a playback device
(BD/DVD player, etc.)
Use this method to connect the unit to a playback device when it cannot be connected to
the TV as explained with method 1 because the TV has no optical digital audio output
jack or analog audio output jacks.
This method can also be used to connect the unit to a playback device, after it has been
connected to the TV, when sound from a BD/DVD player or other device connected to
the TV is not output as surround sound.
A
If the playback device has an optical digital audio output jack
Connect one end of the supplied optical digital audio cable to the unit's TV input jack,
and the other to the optical digital audio output jack on the playback device.
B
If the playback device has no optical digital audio output jack
Connect one end of an optional coaxial digital audio cable to the unit's BD/DVD input
jack, and the other to the coaxial digital audio output jack on the playback device.
Playback device
(such as a BD/DVD player)
A
Optical digital audio
output
or
B
Coaxial digital audio
output (orange)
To watch video from a playback device connected to the TV
Change the TV's input
source
Select the unit's input
source
PREPARATION ➤ Connecting the unit
12
En
R
(supplied)
TV
BD/DVD
NETWORK
Switch to the input source for the BD/DVD player or
other playback device connected to the TV.
Press the input keys on the unit's remote control to
change the unit's input source.
A
:
B
:

Connecting the unit to other devices

Connect devices such as CD/DVD players or game consoles to the unit for dynamic
sound playback. Use an optical digital audio cable, coaxial digital audio cable, or stereo
cable to connect audio output jack(s) on each playback device to input jack(s) on the
unit.
CD/DVD player, game console, etc.
Analog audio output
(red/white)
Optical digital audio
output
Coaxial digital audio
L
output (orange)
SUBWOOFER OUT
ANALOG
To watch video from an external device
Change the TV's input
source
Select the unit's input
source
R
TV
BD/DVD
NETWORK
ANALOG
Switch to the input source for the external device.
To play sound from an external device, press the input
key (ANALOG, TV, or BD/DVD) that corresponds to the
jack(s) on the unit to which the external device is
connected.
NOTE
• When sound from the external device cannot be output in a
digital audio format (Dolby Digital or DTS Digital Surround), be
sure that the device's digital audio output is not set to PCM
(2ch).
• If volume can be adjusted using the device connected to the
unit's ANALOG input jacks, set that device's volume to the
same level as that of other devices connected to the unit's TV
and BD/DVD input jacks to prevent volume from being louder
than expected.
L
SUBWOOFER OUT

Publicidad

Tabla de contenido
loading

Tabla de contenido