Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Threre is also an exciter mounted on the frame an exciter lodged in a cast housing with two bearings. The
exciter housing acts as well as oil reservoir. The belt transmitts the movement of the motor and the rotation
of the exciter produces the vibration.
On the frame there is also a pulling handle to pull the screed on the concrete floor. This handle is insulated
from the beams vibration by 4 silent blocks.
7
INSTRUCTIONS TO ORDER SPARE PARTS
7.1 INSTRUCTIONS TO ORDER SPARE
1.-
LIST. We recommend to include ITEM´S MANUFACTURE NUMBER.
2.-
motor`splastic frame. The transmission and pokers have the manufacture number engraved outside.
3.-
and consignee`s complete name.
4.-
7.2 INSTRUCTIONS TO REQUEST WARRANTIES
1.-
parts with manufacture`s defects. In no case the warranty will cover a malfunction due to improper
usage of the equipment. Labour and shipping fees will always be paid by the customer.
en
2.-
AUTHORIZED SHOP, always including the complete address and name of the consignee.
3.-
requested, it will send a technical report.
4.-
of ENARCO, S.A. or not authorized by it.
NB:
ENARCO, S.A., reserves the right to modify any part of this manual without prior notice.
10
All spare parts request must include PART CODE NUMBER AS STATED IN THE PART
The identification plate with manufacture and model number is located in the top part of the
Let us to know the correct shipping instructions, including the wished route and the address
Do not return the parts without authorisation, the return are done with freight prepaid.
The warranty is valid 1 year after the purchasing of the machine, The warranty will cover
In all warranty requests THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
The Technical Assistance Service will immediately notify you if it accepts the warranty and if
The warranty will be void if any equipment has been previously handled by personnel outside
FIXED AND EXTENSIBLE VIBRATING SCREEDS
Publicidad
Capítulos
Tabla de contenido
