User Manual - Invacare Aquatec Trans Manual Del Usuario

• D User manual
9 Intended Use
This product is intended to be used as a transfer aid.
Users are any adults and adolescents with restricted or
limited mobility (e.g.: legs and/or hips) or limited muscle
strength. If used without an assistant, the users must be able
to keep their own balance.
Indication
Restricted or limited mobility (e.g.: legs and/or hips) or
having balance issues to stand up or walk due to transitional
or permanent disabilities.
There are no contraindications known when using the
product as intended.
The maximum user weight is 140 kg.
10 Setup and Usage (Fig. 3)
1. Place the transfer board with turnable disk on the
seating surface of the bath lift, so that its side flap faces
towards the user. The flap of the transfer board and the
side flap of the bath lift must be aligned with each other.
The turnable disk is unlocked by the weight of the
user.
2. Slide the turnable disk onto the side flap towards the
bath tub rim.
3. Sit down on the turnable disk and carefully slide fully
inwards on the bath lift seat.
4. Rotate by 90 degrees into the bath tub so that you are
correctly positioned for using the bath lift.
11 Maintenance
11.1 General Maintenance Information
This product is maintenance-free, provided that the cleaning
and disinfection instructions are adhered to.
11.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
15632-B
Cleaning Intervals
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
– regularly while it is in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instructions
IMPORTANT!
– Clean by hand
– Maximum cleaning temperature 60 °C
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
12 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
• Inspection
• Cleaning and disinfection
For detailed information, see 11 Maintenance, page 3 .
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
13 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
14 Technical Data (Fig. 4)
Dimensions
365 mm
A
516 mm
B
Height 25 mm
Weights
Trans
Maximum user weight
Materials
ABS
j
2.2 kg
140 kg
PUR
k
3