Replacing Or Refilling Containers; Maintenance - Miele professional PG 8596 Instrucciones De Manejo

en - Using the machine
38

Replacing or refilling containers

The DOS modules are equipped with a monitor which sends a mes-
sage to the washer-disinfector if the level drops below the minimum.
Fill the relevant container with chemical agent when the message

appears in the washer-disinfector's display.
Unscrew and remove the siphon and place it on the drip tray.

Fill or replace the container, fit the siphon and secure the lid.

Feed the siphon into the container until it reaches the bottom.

Make sure the hose is not kinked.
Refill the container in good time to prevent the dispensing system
being emptied completely.
If a container has been emptied, the dispensing system has to be
vented before the start of the next programme.
Follow the information in the operating instructions for the washer-
disinfector.
The drip trays located underneath the containers can be removed
for cleaning and can be cleaned in the washer-disinfector.
Clean the drip trays from time to time.


Maintenance

The dispensing system should be serviced at the same time as the
washer-disinfector by Miele Service.