Door Alignment - LG LSC27914** Serie Manual De Usuario

DOOR ALIGNMENT

Before adjusting the doors, remove the base grille.
See BASE GRILLE INSTALLATION for reference.
If the freezer compartment door is lower than
the refrigerator compartment door, make them
level by inserting flat blade screwdriver into the
groove of the left leveling leg and rotating it
clockwise.
Left leveling
leg
If the freezer compartment door is higher than the
refrigerator compartment door, make them level by
inserting flat blade screwdriver into the groove of
the right leveling leg and rotating it clockwise.
Height
difference
Height
difference
REFRIGERATOR INSTALLATION
Height
difference
Height
difference
Right leveling leg
Adjust the level when the refrigerator door is lower than
the freezer door during the installation of the refrigerator.
Tools you need
• Wrench 5/16" (8 mm)
• Wrench ¾" (19 mm)
Height
difference
Height
difference
Using a ¾" (19 mm) wrench, turn the keeper nut clockwise
to lossen the keeper nut.
Using a 5/16" (8 mm) wrench, turn the adjustment hinge pin
clockwise or ounter clockwise to level the c
freezer door.
After setting the level door, turn the keeper nut
counter clockwise to tighten.
Do not over tight the door adjustment screw. The hinge pin
can be pulled out. (Adjustable range of height is
a maximum of ½" (1.27 cm)).
AFTER LEVELING THE DOOR HEIGHT
Make sure the front leveling legs are completely
touching the floor.
9
Keeper nut
Wrench
Up
Adjustment
hinge pin
Down
refrigerator and