LG LSC27914** Serie Manual De Usuario página 12

Ocultar thumbs Ver también para LSC27914** Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ICE TYPE
You can select water or ice.
• Select Water, Crushed Ice or Cubed Ice by pressing
the ICE TYPE button as to the selection desired. The
Water, Crushed Ice or Cubed Ice icon will light up to
indicate selection.
Light up the cubed ice lamp by pressing the
selection button. The icon will be iluminated.
Light up the water lamp by pressing the
selection button. The icon will be iluminated.
Light up the crushed ice lamp by pressing the
selection button. The icon will be iluminated.
To dispense water or ice, gently push your cup against
the dispenser pad.
NOTE: Hold your cup in place for a couple of seconds
after dispensing ice or water so the last few drops go in
your cup instead of on the floor.
Door Alarm
When either refrigerator or freezer door is left open for
more than 60 seconds, an alarm will sound 5 times at
30 second intervals if the refrigerator or freezer door is
left open for more than 60 seconds. To let you know the
door is open.
Please contact the local service center if warning tone
continues to sound even after closing the door.
ICE PLUS
Press this button once to activate the ice plus function.
The ICE PLUS icon on the display panel will illuminate
when activated. The Ice Plus function runs the freezer
compartment at the coldest settings for a 24 hour period
to increase ice making. Press the button again to cancel
the Ice Plus function.
USING YOUR REFRIGERATOR
11
LOCK
The LOCK button deactivates the temperature controls
and dispenser functions.
Press and hold this button for 3 seconds or until the
Lock indicator light is lit.
To disable the Lock function, press and hold the filter
button for 3 seconds or until the Lock indicator light is
off.
FILTER
(filter replacement cycle)
• There is a replacement indicator light for the water
filter cartridge on the dispenser.
• Water filter usually needs replacement once every six
months.
• Filter light comes on and blinks to let you know when
to replace filter.
• After replacing filter, press and hold Filter button for
three seconds to turn off filter status light.

Publicidad

Tabla de contenido
loading

Tabla de contenido