Erlenmeyer Flasks; Installing A 847 For Erlenmeyer Flasks; Preparing The Load - Miele professional A 313 Instrucciones De Manejo

Installing A 847
for Erlenmeyer
flasks
Preparing the
load

Erlenmeyer flasks

Adjust the height of the frame.

The height of the frame should be adjusted so that the items do not
touch the module's injector rail or the injector nozzle's screw thread.
Remove a knurled nut from the module's injector rail and replace it

with the injector nozzle .
Use a 17 mm spanner (WAF 17) to tighten the injector nozzle .

Place the support on the frame above the injector nozzle .

Secure the support on the right and left using the module's retain-

ing bars .
The Erlenmeyer flasks rest on the support in the module frame.
The cone on the bottom of the injector nozzle should be inside the
neck of the item. This protects the rim from becoming chipped.
en - Areas of application
41