Preparing The Load - Miele professional A 313 Instrucciones De Manejo

en - Areas of application
Preparing the
load
Flasks
Round flasks
40
The laboratory flasks rest on 4 points of the support; the neck of the
flask should not touch the water supply pipe.
The rods inserted in the frame prevent the flasks from touching each
other if they are moved by the force of water during reprocessing.
2 l laboratory flasks are held securely on the support and do not
need any additional supports at the sides. Rods are therefore not re-
quired.
The round flasks rest on 4 points of the support; their necks should
not touch the water supply pipe.
The rods inserted in the frame prevent the round flasks from touching
each other if they are moved by the force of water during repro-
cessing.