Sony BRAVIA KDL-32R300C Manual De Instrucciones página 10

2
Secure the TV to the stand.
Use the optional hardware listed below (not
supplied):
 M4 machine screw (screwed into the screw
hole of the TV).

A screw or similar (attach it to the stand).

Rope or chain (strong enough to support the
weight of the TV). Make sure that there is no
excess slack in the rope or chain.
Screw hole of the TV
Screw
(not supplied)
The length of the M4 machine screw differs
depending on the rope or chain diameter. Please
refer to below illustration.
9-13 mm
TV
10
US
M4 machine screw
(not supplied)
Rope or chain
(not supplied)
Screw M4
Rope or chain
3
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
Anchor
bolts
(not
supplied)
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the stand without securing the TV and
the stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
Wall-mount
holes
Rope or chain
(not supplied)
Wall-anchor
(not supplied)