Sony HT-CT100 Manual De Instrucciones página 25

Using the Volume Limit
function
When the System Audio Control function is
active, and the output method changes from the
TV speaker to the system speaker automatically,
loud sound may be output depending on the
volume level of the system. You can prevent this
by limiting the maximum volume level.
1
Press AMP MENU.
2
x/X
Press repeatedly until "SET HDMI"
appears, then press
3
x/X
Press repeatedly until "VOL LIMIT"
appears, then press
4
x/X
Press to select the maximum
volume level you want.
The maximum volume level changes as
follows:
MAX y 49 y 48.....2 y 1 y MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the system speaker to the TV speaker.
Tips
• We recommend that you set the maximum volume
level to a little lower than the volume you usually
listen to.
• Regardless of the maximum volume level you set, the
VOLUME +/– button of the system and the MASTER
VOL +/– button of the remote are operable.
• If you do not want to limit the maximum volume
level, select "MAX."
Using the input buttons of the
remote
The input buttons (TV (white), BD, DVD, SAT)
work as follows when the Control for HDMI
function is set to on.
• BD, DVD, SAT: Since the input of the TV is
• TV: The input of the TV switches
or c.
or c.
Tip
• You can control connected Sony components by
pressing the input buttons. For details, refer to
"Controlling the connected Sony components with the
remote" (page 27).
also switched automatically, you can watch the
image of the selected component on the TV
simply by pressing the buttons.
automatically. When you connect a Sony TV,
you can watch the TV simply by pressing the
buttons.
25
US