Supplied Items - Sony Handycam DCR-SR220 Guía De Operaciónes

Ocultar thumbs Ver también para Handycam DCR-SR220:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply
with the limits for a digital device pursuant
to Subpart B of Part 15 of FCC Rules.
For the State of California, USA only
Perchlorate Material - special handling may
apply, See
www.dtsc.ca.gov/hazardouswaste/
perchlorate
Perchlorate Material: Lithium battery
contains perchlorate.
Notes on use

Supplied items

The numbers in ( ) are the supplied
quantity.
AC Adaptor (1)
Power cord (Mains lead) (1)
Handycam Station (1) 
A/V connecting cable (1) 
USB cable (1) 
Wireless Remote Commander (1)
A button-type lithium battery is already
installed.
Rechargeable battery pack NP-FH60 (1)
CD-ROM "Handycam Application Software"
(1) (p. 24)
Picture Motion Browser (Software)
PMB Guide
Handycam Handbook (PDF)
"Operating Guide" (This manual) (1)
Using the camcorder
The camcorder is not dustproofed, dripproofed
or waterproofed. See "Precautions" (p. 30).
Do not do any of the following when the
(movie)/
(still image) lamps (p. 10) or
ACCESS lamps (p. 12, 16) is lit or flashing.
Otherwise the media may be damaged, recorded
images may be lost or other malfunctions could
occur.
Remove the "Memory Stick PRO Duo."
Remove the battery pack or AC Adaptor from
the camcorder.
Apply mechanical shock or vibration to the
camcorder.
When connecting your camcorder to another
device with a cable, be sure to insert the
connector plug in the correct way. Pushing the
plug forcibly into the terminal will damage the
terminal and may result in a malfunction of
your camcorder.
Do not apply shock or vibration to your
camcorder. The hard disk of the camcorder may
not be recognized, or recording or playback
may not be possible.
Do not use your camcorder in very loud areas.
The hard disk of the camcorder may not be
recognized, or recording may not be possible.
To protect the internal hard disk from shock
by dropping, the camcorder has drop sensor
function*. When a drop occurs, or under a non-
gravity condition, the block noise made when
this function is activated by the camcorder may
also be recorded. If the drop sensor catches a
drop repeatedly, recording/play back may be
stopped.
When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection features of the
camcorder being activated in such situations.
In this case, an indicator appears on the LCD
screen (p. 28).
US
US


Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido