Weidmuller THM Basic 300 Instrucciones Para El Manejo página 54

Interfaces
Connection with USB
5 Choose USB.
Figure 9
6 Enter in the new IP address from your administrator and if required the data of "New subnet mask" and
"New gateway". Please confirm and transmit the new IP data to the THM Basic 300 printer with "Update".
7 A self-test with the THM Basic 300 shows you whether the data transfer was successful or if you have to
do it twice. On the print you can see the actual "IP address", "New subnet mask" and "New gateway" of
the printer. For the self-test please press and hold "Cancel" until all LED's start to flash and then press
"Pause".
Make sure that you inserted a big label for this test in the THM Basic 300 printer.
8 Please restart the process from point 1, if the self-test shows you that the IP data transfer wasn't success-
ful. For the restart it is necessary to turn the printer of and after a view seconds on again.
54 1168670000/02/08.11