Beta 1885/KF Manual Del Usuario página 25

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
SETUP
Setting up date and time.
- This function allows the date and time for printing the ticket to be changed.
Checking balance calibration.
- Press the key to select - SETUP-; press the
- Press the key to select – TARE TEST (balance icon) -; press the
tank in the top line, and the sample weight in the bottom line respectively.
- The operator will then place a known weight (e. g. a 2 kg weight) on the storage tank and read the exact weight on the display.
This will allow the operator to periodically check that the balance of the station weighs correctly.
Language
The station can display messages in several languages:
• ITALIAN
• ENGLISH
• DUTCH
• etc.
To change the language, take the following steps:
- Press the key to select the - SETUP- function; press the
- Press the key to select the - LANGUAGE (flag icon) – function; press the
- Press the key to select the required language; press the
NOTES
Emptying and filling oil tanks.
Old oil.
- Empty the tank when the level is approximately 10 l.
- Use old oil containers.
Old oil shall be disposed of as special waste in accordance with current provisions.
Fresh oil
- Oils recommended by the system's manufacturer should be used.
SERVICE
Filter replacement.
To replace the filter, take the following steps:
- Open the rear cover.
- Unscrew the body of the filter on the central plate (figure 3).
- Fit in a new cartridge.
Replace the filter with an original one (BETA item 018850510).
key.
key. The display will show the amount of oil in the
key.
key.
key.
Figure 3
EN I
25