Harman JBL WIND Manual Del Propietário página 22

Getting Started
Two easy steps get it up and running quickly.
Step 1: Charging before use
Connect your WIND BT Speaker to a USB power source using the enclosed
USB charging cable.
Step 2: Operation
• BT connection
As soon as the portable WIND box is turned on, the BT indicator will blink and
signal to confirm that the unit is currently in BT pairing mode. Access the BT
settings on your phone, tablet or computer to locate the device called "JBL
WIND" and press to select. A signal will be issued to confirm that the device
has been satisfactorily paired in seconds. The next time you use the WIND
device, the product will automatically connect to your devices once pairing
has been performed. To disconnect the device, press the "Play / Pause"
button for 5 seconds and it will start pairing a new available device.
• FM Radio connection
As soon as WIND is turned on, press the source select button again, after the
beep, it will start playing the FM radio.
Click the "+" and "-" buttons to advance and return the radios respectively.
When you turn on your JBL WIND for the first time, after playing the radio,
press the "Play / Pause" button up to start scanning the FM radios of your
region as soon as your radio is ready for use.
OBs: This process needs to be performed only on first use.
• Direct Connection
The WIND Portable Box can also connect to devices that have a handset
output or a line-out using the AUX cable shipped with the device.
• Micro SD / TF card
Play your music through a micro SD / TF card. Click the "source" button to
switch between signal inputs.
22