Harman JBL WIND Manual Del Propietário página 25

Altavoz portátil para diferentes acoplamientos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Unplug any cables plugged into the AUX IN, restart all devices and then
attempt pairing again. Issue: Interference or static during playback Solution:
• Avoid using the device between concrete or other building structures that
may interfere with the signal.
Please check if the battery level of the unit
and the BT device and charge if necessary.
Issue: Radios are not tuning well.
Solution:
• Check that the radios have been scanned according to instructions on page
23.
Safety Instructions
This product is specially designed based on the full attention to safety; in
order to make sure the accident-free operation, please abide the guidelines
listed below:
• Always position the unit on a stable and level surface. Unstable surface can
cause the unit to topple and fall, resulting in possible damage or injury;
• Do not drop, unpack, open, beat, curve, prink and burn the unit;
• Avoid using the unit nearby basins or sinks where it may come in contact
with water;
• Do not place any ware with full water on the top of the unit, such as vase,
glass, pot, and please avoid placing candle on the speaker surface as well;
• Protect the using of the unit from any overheating devices (such as radiator,
heating installation, cooking stove or other heating devices);
• Regardless of what reasons cause the unit damage, please ask for the
maintenance personnel to repair;
• If you want to do the cleaning, please turn off the unit and unplug the power
cable from the outlet first;
• Set the volume properly to prevent injury to the unit and your health;
25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jbl wind 2

Tabla de contenido