Harman JBL WIND Manual Del Propietário página 23

Speaker Phone
After paired your mobile phone to WIND with BT , the speaker phone function
can be used.
• Make call : Call will automatically transfer to the speakerphone. If not, tap
play/pause button;
• Answer call: Tap play/pause button to answer the incoming call;
• End call : Tap play/pause button during the call to end the call;
• Reject call : Hold play/pause button to reject the incoming call;
• Redial last number: Double tap play/pause button to redial last number
when it is not in a call.
Charge
When the power is low, a beep will comes out from the speaker, please
charge the speaker when you heard the beep.
1. Connect the standard USB end of the supplied USB cable to a USB power
source (like PC, USB power adapter...etc.)
2. Connect the Micro USB jack to the USB charging port in the unit. The
charging indicator will light up while charging
3. It will take about 2 hours to fully charge the BT speaker
4. The LED indicator will stay on while charging, and goes off after fully
charged.
Note: if the unit is not to be used longer than 7 days, please charge the unit
for 10 minutes before turn on the unit.
Connection
Laptop / notebook / PC As the BT© versions for these types of devices varies
greatly, the connection methods will differ as well. If you cannot connect with
the WIND BT Speaker using the previous method instructed you may need to
install a new version of the BT© driver. Please reference the instructions of
device for details.
23