Intended Use; Queries And Technical Problems - Miele professional A 602 Instrucciones De Manejo

The A 602 module can be used in the A 502 injector unit. The injector
unit is supplied with its own operating instructions.
8 mm shafted instruments for da Vinci® Xi system robots can be
reprocessed in the A 602 module. A special A 808 holder is addition-
ally required for the da Vinci® Xi stapler.
Miele have tested the reprocessing of these instruments with the
ROBOTVARIO X·tra programme and thermosept® X·tra cleaning
agent (manufactured by Schülke & Mayr) and recommend the use of
this procedure.
This programme does not come as standard for PG 8527 and PG
8528 washer-disinfectors and must be added to the Profitronic unit
retrospectively by Miele.
Medical devices for reprocessing are referred to as the wash load if
they are not more closely defined.

Queries and technical problems

If you have any queries or technical problems that you would like to
discuss please contact Miele. Contact details can be found at the
back of the Operating Instructions for your washer-disinfector or go
to www.miele-professional.com.
en - Intended use
31