Bosch GSB 1200-2-LI Professional Instrucciones De Servicio página 19

Battery tool use and care
► Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
► Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
► When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
► Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
5. Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Safety Warnings for Drills and
Screwdrivers
► Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
► Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
► Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
or fastener may contact hidden wiring. Cutting
accessory and fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
► Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility
company for assistance. Contact with electric lines
can lead to fire and electric shock. Damaging a gas line
can lead to explosion. Penetrating a water line causes
property damage.
► Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
► Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
Symbols
The following symbols are important for reading and understanding the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the symbols will help you to use the machine in a better and safer
manner.
1 600 A00 5BG | 2014.12
Manual GSB 1200-2-LI.indd 19
► Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
► Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
► Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
► In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
► Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
► The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and the
battery can burn,smoke, explode or overheat.
Additional Safety and Working
Instructions
► Dusts from materials such as lead-containing
coatings, some wood types, minerals and metal
can be harmful to one's health and cause allergic
reactions, lead to respiratory infections and/or
cancer. Materials containing asbestos may only be
worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
► Prevent dust accumulation at the workplace. Dusts
can easily ignite.
► The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery
in the battery charger before using for the first time.
► Read the operating instructions of the battery
charger.
► Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
► Adjust the gear switch only when the machine is at a
complete stop.
► If the gear switch cannot be pushed to the stop, turn
the drill chuck a little.
To save energy, only switch the power tool on when using it.
19
English |
Bosch Power Tools
07/01/15 15:29