Use - Faber UNIX Manual De Instrucciones

USE

Note: the displays are capacitive: the commands can be selected directly by pressing on them.
Pot Detector: The hob switches off automatically after few minutes if it is not
detected any pot.
Booster: increasing power over the level 9 , you can turn on the Booster which act
with the maximum speed for up to 5 min.
Heat Residual: After turning off the power levels, the residual heat on a cooking
element is displayed as long as the temperature is over the defined threshold.
Child Lock: After use , you can lock the screen by pressing, at the same time, the button on
the right
Timer: Selecting the plates before you switch on the timer, they will turn off when
the time run out.
EN
Cooker Hob's Commands
General Turning On and Off the Appliance
Plate Selection
TIMER – increase and decrease from 1 to 99 minutes by sliding the Slider
SLIDER - by sliding your fingers on the keys, you can increase or
decrease the power from level 0 to level 9
BOOSTER – maximum power for 5 minutes
PAUSE - interruption of the power
Functions
and , followed yet by the bottom on the right . The same to unlock.
38