S&P TL-29 Instrucciones De Uso página 10

5. CAbLE STOrAgE
• While the product is not in use, you can store the cable pushing it into the base of the product.
• Note that while the product is in operation, the cable must always be completely pulled out.
6. uSE Of ThE hEATEr
See picture 5.
6.1 version with switch and thermostat (TL-29 / TL-29W)
• The heater has 2 knobs controlling the switch and the thermostat.
• The switch knob has 4 positions, allowing to select the desired power setting.
• Starting from the " * " position, turn the thermostat knob clockwise until you hear a "click": the appliance
starts working at the desired power setting.
• The thermostat maintains the desired room temperature switching on and off automatically the appliance.
The more the knob is turned clockwise, the higher is the maintained temperature. Maximum thermostat
setting corresponds at about 30°C; " * " position corresponds to approximately 5°C.
• For correct use of the thermostat, see section "USE OF THE THERMOSTAT"
6.2 Model with thermostat and 60' timer (TL-29TW)
• The heater has 2 knobs.
• Turn the timer knob clockwise to select the working time you prefer from 5 to 60'. The heater starts working
at full power (2000W) and thermostat setting doesn't influence the functioning;
• After the selected period the heater will automatically turn to mid power (1000W), thermostatically controlled
according to the thermostat setting. For the use of the thermostat see section 6.3.
• When the heater is working under timer control at full power, the thermostat doesn't control the room
temperature. In this condition, do not use the heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision is provided.
6.3 use of the thermostat
• In a room where the temperature is too high (more than 30°C), it is normal that the thermostat will not
switch on the heater.
• In a room where the temperature is too low (around 5°C or even less) it is also normal that the thermostat
will keep the appliance working until the temperature gets higher.
• To select the right thermostat position we suggest you to
• turn the thermostat in maximum position (clockwise).
• leave the appliance working until the comfortable temperature is reached.
• turn the knob anti clockwise until you hear a "click" and the appliance stops.
• turn clockwise again the knob (just a little): in this position the thermostat will maintain the comfortable
temperature you have selected.
10