Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
In this instruction manual we will show you how to properly use
your Kreg Crown Pro
the tool and correctly compensate for the molding's unique spring
angle, as well as how to adjust your saw to match the angle,
and more. However, there is more to know about the installation
process, and Kreg
at www.kregtool.com. Visit the Crown-Pro
watch a step-by-step process and demonstration as well as tips
and tricks to help you along the way.
Quick Tips for Installation:
1. For added strength, add wood glue to all joints.
2. Use a finishing nail gun for speed and simplifying installation.
3. Make your cuts a bit longer and make adjustments until it fits
as desired.
4. Install a backer board ahead of time for easier nailing.
5. No backer board: Be sure to nail into the wall framing.
6. Paint or stain the molding before attaching it to the wall.
7. Get an extra hand for help. If no help is available, use a
nail to hold up the other end
For more information you can speak to our friendly customer
service team at 1.800.447.8638 or emailing directly at
custservice@kregtool.com.
. This manual will explain how to position
™
recommends and suggest this process found
®
Kreg Info
product page and
™
www.kregtool.com
Publicidad
Tabla de contenido
