Troubleshooting; Technical Specifications - Buffalo CD605 Manual De Instrucciones

UK

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not
working
Bowl will not fit back in to
place
The appliance is
overheating
The appliance is noisy
The mixing attachment
fails to rotate properly
Cannot select gear

Technical Specifications

Model Voltage
CD605 230V 50Hz
CD606 230V 50Hz
CD607 230V 50Hz
6
Probable Cause
The unit is not switched on
The Stop button not released (CD607) Turn button clockwise to release
Plug and lead are damaged
Fuse in the plug has blown
Power supply
The overload switch has activated
Safety Guard not closed
Appliance not in gear
Bowl not fully raised
Bowl pins or surrounding area clogged
with mix
The mixing bowl is overloaded
The appliance has been operating for
too long
Bowl or mixing attachment not
correctly fitted
Worn bearings/damaged gears
The belt has become loose
Gearing cogs misaligned
Power Current
500W 2A
1100W 4.7A
1500W 6.5A
Check the unit is plugged in
correctly and switched on
Call BUFFALO agent or qualified
Technician
Replace the fuse
Check power supply
See overload switch information in
the Operation section of this
manual
Close Safety Guard fully
Put in gear
Ensure the Bowl lever is pushed
back fully
Clean the appliance
Turn off the appliance and empty
some of the contents
Turn off the appliance and allow to
cool down for 30 minutes
Remove and refit bowl/mixing
attachment
Call BUFFALO agent or qualified
Technician
Call BUFFALO agent or qualified
Technician
Turn Off appliance and manually
turn the whisk attachment slightly.
Select the gear again.
Dimensions
Weight
w x d x h mm
485 x 410 x 635
560 x 540 x 765
620 x 620 x 1125
Action
Bowl
Volume
76kg 10l
107kg 20l
208kg 30l