Phonic FIREFLY 302 USB Manual Del Usuario página 13

Mac OSX Driver Installation
1. it is recommended that you quit all applications before starting the installation process.
2. Do not connect the Firefly 302 USB to the Mac until after you have installed the driver.
3. insert the installation disc into the cd drive of your computer. if the cd does not automatically
start the installation process, navigate to your CD drive → "Phonic" → "Firefly302USB"→ then
run "PHONIC_FireflyUSB.mpkg" to begin the installation manually. The Firefly Control Panel
software also will be installed at this time.
4.
Follow the on-screen installation instructions.
5. After installing the Mac driver, connect the Firefly 302 USB to the Mac's USB port.
Select "change install location..." to select a new destination for the Mac software. if not, the
software will automatically be installed to the default location.
Firefly 302 USB
9