Channel Assignment; Operating With Daw Software - Phonic FIREFLY 302 USB Manual Del Usuario

CHANNEL ASSIGNMENT

When using a digital audio Workstation on a Pc,
and within the included Phonic Firefly 302 USB
control panel software, the following names have
been attributed to the input channels of the fire-
fly.
Channel Name Firefly Channel
analog in 1 1/4" and rca analog input 1
analog in 2 1/4" and rca analog input 2
Mic in Microphone input
Mic in Microphone input
S/Pdif in S/Pdif input
S/Pdif in S/Pdif input
Midi in Midi input
If you would like to use the Firefly 302 USB as
your default audio output device on your Pc, sim-
ply go into the Windows control panel and select
"Sound and audio devices." Select the audio tab,
and use the pull-down menu to select one of the
Firefly 302 USB's inputs from the list of available
output devices. The Firefly 302 USB can also be
selected as the default output device for individ-
ual programs by editing said programs' settings
/ options.
Firefly 302 USB
OPERATING WITH DAW SOFT-
WARE
after successfully completing the installation pro-
cess, the following process must be followed to
work efficiently with the Firefly 302 USB. In the
following example, we are using Cubase - how-
ever most other software should be similar.
1. open the program.
2. Go to the 'Devices' pull-down menu and select
'Device Setup'. On the left, select 'VST Multi-
track'.
3. From the ASIO Driver drop-down list select the
'Firefly302USB ASIO Driver'. A pop-up box will
ask you if you want to switch to the aSio driver.
Click 'Switch'. This completes the basic setup.
4. the following steps should be followed to activate
audio tracks received from or sent by the Firefly
302 USb.
a. Go to the "devices" pull-down menu and se-
lect 'VST Inputs'. This will display the various
inputs ("analog in 1", "analog in 2", etc.)
b. activate channels by clicking the "active" but-
ton located next to each channel name.
5. for further instructions on the operation of cu-
base, please consult the owner's manual by
pressing f1 while the program is open.
If you wish to reset the Firefly ASIO driver, simply go
to the 'devices' pull-down menu and select 'device
setup'. Simply click 'reset' and select the 'Firefly-
302USB ASIO Driver'. Click 'ok' to continue and the
Firefly 302 USB should once again become func-
tional.
11