WINDOWS OPERATION
The Firefly control panel on the PC can be ac-
cessed at any time by entering choosing the
shortcut from your Programs menu. this program
will not only allow users to alter their device and
channel names and properties, but will also let
them adjust buffer settings, change sampling
rates, and so forth.
Sample Rate
in this menu, users are able to adjust the sam-
pling rate of the Firefly 302 USB. The sampling
rate can be chosen between 44.1, 48, 88.2, 96,
176.4 and 192 kHz. Press 'apply' once a new
sampling rate is selected.
Minimum
Small/Smaller
large/Small
Maximum/Standard
12
Buffer Settings
the buffer Settings menu is used to adjust the
Streaming buffer, as well as the buffer settings
when using the aSio and WdM drivers.
The 'Streaming Buffer' can be adjusted between
Minimum (1 millisecond), Small (2 milliseconds),
large (4 milliseconds) and Maximum (8 millisec-
onds). the selection of the Streaming buffer size
will determine the size of the aSio and WdM buf-
fer sizes, as displayed in the table at the bottom
of this page.
When selecting a new buffer size, users can click
'Apply' to apply the newly selected buffer setting
to the device.
Streaming buffer Setting
Minimum (1 ms)
Small (2 ms)
1.5 ms
3.0 ms
66 samples
132 samples
2.0 ms
4.0 ms
88 samples
176 samples
3.0 ms
6.0 ms
132 samples
256 samples
4.0 ms
8.0 ms
176 samples
353 samples
large (4 ms)
Maximum (8 ms)
6.0 ms
12.0 ms
256 samples
529 samples
8.0 ms
16.0 ms
353 samples
706 samples
12.0 ms
24.0 ms
529 samples
1058 samples
16.0 ms
32.0 ms
706 samples
529 samples
Firefly 302 USB