Fast Forward / Reverse; Repeat Functions And Random Replay; Muting The Sound; Compiling An Individual Title Sequence - Monacor CD-112/BT Manual De Instrucciones

Ocultar thumbs Ver también para CD-112/BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
6.3.3 Alphabetic search for MP3 titles
1) Press the button FIND (29) on the re-
mote control . A magnifying glass sym-
bol will flash on the left at the bottom
of the display . On the right of it, the let-
ter
will appear and in the upper line
A
of the display the name of the first file
beginning with the letter A .
2) Press the button CUE [forward direction]
or REV (8) [reverse direction] to select the
first letter of the desired file name . The nu-
merals 0 – 9 are also available . If there are
no file names beginning with certain letters
or numbers, these letters or numbers are
marked
.
None
3) If there are several file names beginning
with the same letter, select the desired letter
and keep the button REV or CUE pressed
until the letter starts flashing next to the
magnifying glass symbol . All file names be-
ginning with the letter will now be available
to be selected one after the other with the
button REV or CUE .
4) When searching, the display will always
show the number of the folder and of the
title on the right at the bottom . When you
have found the desired title, start the replay
with the button PLAY/ PAUSE (10) .
6.3.4 Selection of folders and
search for folders
With MP3 files in several folders (file directo-
ries), press the buttons FOLDER (16) during the
replay to go to the first title of the next folder
(button  ) or to the first tile of the previous
folder (button  ) .
If you stop the replay with the button
STOP (9) first and then press the button FOLDER
  or  , the upper line of the display will
show the folder name and the lower line will
show the folder number behind the symbol
The search function even allows you to find a
folder with a certain name during the replay
of a title:
1) Press the button FIND (29) twice so that the
magnifying glass symbol will flash on the
display and
(directory) will appear on
Dir
the right of it .
2) Search for the desired folder with the but-
tons REV – SKIP – CUE (8) . The upper line of
the display will show the folder name and
the lower line will show the folder number .
3) When you have found the folder, press the
button PLAY/ PAUSE (10) to start the first
title or keep the button REV or CUE pressed
to start another title from the folder until
appears next to the magnifying glass
File
symbol . Press the buttons REV – SKIP – CUE
to select the titles from the folder one after
another . To start the title selected, press the
button PLAY/ PAUSE .

6.4 Fast forward / reverse

For fast forward, keep the button CUE (8)
pressed; for fast reverse, keep the button REV
pressed . With MP3 files, fast forward / reverse
will only be possible within a title . You will not
be able to trace it acoustically, only by means
of the time indication on the display .
10
6.5 Repeat functions and
random replay
Press the button REPEAT (17) to activate one
of the repeat functions and the replay of the
titles in random order:
basic setting (PLAY ALL)
all titles of the sound carrier or of a pro-
grammed title sequence will be replayed
once, then the replay will stop
first actuation of button
(PLAY ALL RANDOM)
the titles will be replayed once in random
order
next actuation of button (REPEAT TRACK)
the title selected will be repeated contin-
uously
next actuation of button (REPEAT FOLDER)
all titles in the folder selected will be re-
peated continuously
(function available for MP3 files only)
next actuation of button (REPEAT ALL)
all titles will be repeated continuously
next actuation of button (RANDOM REPEAT)
all titles will be replayed continuously in
random order
next actuation of button (PLAY ALL)
return to basic setting

6.6 Muting the sound

To mute the sound of a title during replay, press
the button MUTE (26) on the remote control .
To reactivate the sound, press the button MUTE
once again .
6.7 Compiling an individual
title sequence
For replaying a selection of titles in a certain
order, a sequence of up to 64 titles can be
.
programmed . For this purpose, in case of MP3
files, the arrangement of the folders should be
known to you (
chapter 6 .3 .4) as it will be
necessary to enter the corresponding number
of each title to be programmed .
1) Set the CD player to the stop mode; press
the button STOP (9), if required .
2) Activate the programming mode with the
button PROG (18) . Press all other buttons
within 15 seconds, otherwise you will exit
the programming mode . In this case, press
the button PROG once again . The display
will show:
– for a CD without MP3 files
PROGRAM
CD Pƅ01
00
– with MP3 files
PROGRAM
Pƅ01
000 0000
3) For CDs without MP3 files, skip this step
and directly proceed with step 4 .
For MP3 files, first select the number of
the folder containing the first title desired
for the title sequence . This is also necessary
when all the files are in the ROOT directory
without folder . In this case, enter 1 as the
folder number .
Select the folder number with the but-
tons REV – SKIP – CUE (8) or with the nu-
merical keys (3) . To save it, press the button
PROG . The four zeroes will flash as a prompt
to enter the title number .
4) Select the number of the first title of the
title sequence with the buttons REV – SKIP
– CUE (8) or enter it with the numerical keys
(3) . For MP3 files in folders, please note that
these files are not arranged consecutively
but that the first file in each folder is always
number 1 .
5) To memorize press the button PROG . The
display will show the next memory location
number, e . g .
.
P-02
6) Repeat steps (3), 4 and 5 for all further titles
desired until the entire title sequence has
been programmed .
7) To start the title sequence, press the button
PLAY/ PAUSE (10) . The upper line of the dis-
play will show
(memory) and the title
MEM
sequence will be replayed .
8) Press the buttons REV – SKIP – CUE to select
any title of the title sequence or keep the
corresponding button pressed to activate
the fast forward / reverse function within a
title .
9) The replay will stop after the title sequence
has been replayed or when you press the
button STOP . To restart the title sequence,
first press the button PROG, then the button
PLAY/ PAUSE .
Note: A programmed title sequence will be deleted
when you change the sound carrier, when you press
the button FUNC (19), when you press the button
STOP in the programming mode and when you
switch off the player .
6.8 Operation of the
Bluetooth receiver
The Bluetooth receiver is used for radio com-
munication with a Bluetooth signal source (e .g .
notebook, smartphone, tablet PC) . Thus, the
CD-112 / BT will be able to replay the audio files
that have been stored on this source .
Note: The Bluetooth signal source must be com-
patible with the A2DP protocol (Advanced Audio
Distribution Profile); otherwise radio communication
will not be possible .
1) Enable the Bluetooth function on the note-
book, smartphone or tablet PC (see manual
of the unit, if necessary) .
2) To switch on the Bluetooth receiver of the
CD-112 / BT, keep the button BT POWER (15)
pressed briefly until the LED PAIR (12) starts
flashing .
3) To link the CD-112 / BT to the Bluetooth
signal source, keep the button PAIR (13)
pressed briefly until the LED PAIR keeps
flashing more slowly . As soon as the radio
communication has been established, the
LED PAIR will light permanently .
Note: On the display of the Bluetooth signal
source, the CD-112 / BT is indicated as "Audio
Bluetooth" .
4) Start a title at the Bluetooth signal source .
5) To pause or continue the title, press the
button   I (15) .
Note: As long as the replay is interrupted, the
signal of the CD / MP3 player will be present at
the output PRIORITY (21) .

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

21.2940

Tabla de contenido