47 Network Connection; 471 Mobile Application (App); 472 Integration Into A Wireless Lan - Monacor IWA-50WIFI ⁄ WS Manual De Instrucciones

4.7 Network connection
Via its wireless LAN functionality, the ampli-
fier IWA-50WIFI/WS can be integrated as a
client into an existing wireless LAN network .
Cable connection via Ethernet to an existing
network is also supported .
4.7.1 Mobile application (app)
For operation of the amplifier via wireless
LAN, install the app "AllPlay Jukebox" from
Qualcomm on a mobile device with the oper-
ating system Android (version 4 .1 or higher)
or the app "Home Studio" from D-Home
Smaart on a mobile device with the operating
system iOS (version 8 .0 or higher) . The app
is available free of charge on the Internet
from the "Google Play Store" or the "Apple
App Store"* .
4.7.2 Integration into a wireless LAN
A router with the wireless LAN standard IEEE
802 .11n and with WPA2-PSK encryption
(AES) is required as a minimum . For multi-
room applications, a 5 GHz multimedia router
with a data rate of > 600 Mbit / s is recom-
mended . To ensure the best connection pos-
sible to all wireless LAN components, install
the router at a central location .
* The software is not covered by the warranty of MONACOR INTERNATIONAL . Please contact the publisher
of the software if any problems occur .
18
4.7.2.1 Using the WPS function
Connection to the existing wireless LAN can
be most conveniently established provided
that the wireless access point of this network
(e . g . wireless LAN router) supports the WPS
standard (Wi-Fi Protected Setup):
1) Keep the recessed WPS button (6) at the
amplifier IWA-50WIFI/ WS pressed for
8 seconds, using a thin, non-conductive
object . The Wi-Fi LED indicator (3) will
flash rapidly .
2) Activate WPS at the wireless access point
(router) .
3) The amplifier IWA-50WIFI / WS will be con-
nected automatically to the wireless LAN .
The LED indicator will light in white once
the connection has been established .
The name used in the network is preset to
"SOUNDAROUND CONTROLLER"; it can be
changed in the menu "Settings" of the app,
e . g . to indicate the place of installation .