Synchronize The Sensor And Controller Interface - Rain Bird WR2 Manual Del Usuario

Ocultar thumbs Ver también para WR2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Irrigation Modes
Programmed Irrigation:
WR2 Wireless Sensor
is actively managing
the irrigation controller
/ timer. Once a set
Suspend Irrigation for 72 Hours:
User has elected to
temporarily suspend
irrigation for 72 hours.
resume programmed
irrigation mode after 72 hours
to programmed irrigation mode if set points are satisfied).
Override Sensor for 72 Hours:
User has elected to
permit irrigation in
the timer schedule
regardless of environmental conditions (i.e. rainfall or
automatically resume programmed irrigation mode after
returning to programmed irrigation mode if set points are
satisfied).
4
Synchronize the Sensor and
Controller Interface
After the Controller Interface is wired to the irrigation
timer, the Sensor and Controller Interface need to
establish a radio communication link. When the link
is established, the Sensor and Controller Interface are
considered "paired."
installation sequence.
Battery Cassette
and CR2032 battery
WR2 Wireless Sensor
Lower
Casing
Unlocked
Position
Locked
Position
LED flashes when
cassette is locked
5

Publicidad

Tabla de contenido
loading

Tabla de contenido