Thrustmaster T-LCM Manual De Instrucciones página 8

Adjusting the inclination of the pedals
- Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11)
and its plastic support (10) in place.
- Next, rotate the plastic pedal head support (10) 180° (or change it), and then fasten everything
together again using the screws.
Less inclined position
Number of different inclination positions per pedal:
Adjusting the alignment of the pedals
- Install the plastic pedal head support (10) to move a pedal forward.
- Remove the plastic pedal head support (10) to move a pedal back.
Forward position (by default)
Examples with the accelerator pedal:
More inclined position
(by default)
- 3 for the accelerator pedal
- 3 for the brake pedal
- 3 for the clutch pedal
Examples with the accelerator pedal:
7/16
Vertical position
Back position