Cleaning And Maintenance; Spare Parts - Reliable Steamboy T2 Manual De Instrucciones

INStRUCtIONS FOR USe OF CaRpet GLIDe aCCeSSORy
• Please ensure microfiber pad is attached as outlined previously.
• Please place carpet glide on the floor in an upright position with the
flat surface facing downwards.
• Please place the base of the glider.
• The carpet glide is now ready for use.
ImpORtaNt
The carpet glide is designed not to be fixed to the base for safety
reasons including preventing burns.
The carpet glide is designed for use on soft carpeted areas only.
It is not designed for use on hard floor surfaces.

CLeaNING aND maINteNaNCe

CaUtION: prior to cleaning or maintenance isolate the unit by removing the
cord from the power socket. Do not immerse the unit in water.
• The microfiber pad can be machine washed in hot water and air dried.
• Wipe the Steamboy T2 with a soft cloth.
• The Steamboy T2 should only be used with its own specially developed
microfiber pads and anti-scale cartridge (spare pads and cartridges are
available from your retailer).

SpaRe paRtS

2 X Large O Ring – Can be used to replace O rings at bottom of water tank.
1 X Small O Ring – Can be used to replace O ring at bottom of filter.
* If spare parts are required, please contact Reliable at 1 800 268 1649
10