Audio Adjustments
Function of DPX503
Cabin selection
You can compensate the delay of the sound arrival
time, which is caused by the installation position of
the speakers, by selecting your environment from
the following car types;
Car type (rear speaker position)
Not compensating.
Compact car (rear door)
Compact car (cargo)
Full size car (rear door)
Full size car (cargo)
Station wagon (rear door)
Station wagon (cargo)
Minivan (rear door)
Minivan (cargo)
Sport-utility vehicle (rear door)
Sport-utility vehicle (cargo)
Minivan Long (rear door)
Minivan Long (cargo)
Calls the value adjusted at <DTA> (page 19).
1
Enter Cabin select mode
>
Select "SOUND"
"S-SET"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the car type
Turn the Control knob and push the center
when the desired item is displayed.
3
Exit Cabin select mode
Press the [FNC] button.
⁄
• You can compensate the distances in more details by
using <DTA> (page 19) function.
In addition, the value specified at <DTA> can be called
by selecting "User".
Display
"OFF"
"Compact1"
"Compact2"
"Full Size Car1"
"Full Size Car2"
"Wagon1"
"Wagon2"
"Minivan1"
"Minivan2"
"SUV1"
"SUV2"
"Minivan(Long)1"
"Minivan(Long)2"
"User"
>
"CABIN".
Function of DPX503
DTA (Digital Time Alignment) setting
Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 19).
1
Enter DTA setting mode
>
Select "SOUND"
"S-SET"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the speaker you want to set
Setting speaker
Front speaker
Rear speaker
Subwoofer
Turn the Control knob and push the center
when the desired item is displayed.
3
Set the compensation value of the speaker
position
Turn the Control knob.
Adjust between 0 and 14.44 feet.
Refer to <Appendix> (page 30) on how to set the
compensation value.
4
Exit DTA setting mode
Press the [FNC] button.
>
"DTA".
Display
"DTA-Front"
"DTA-Rear"
"DTA-Sub"
19
|
English