X'over Setting; Equalizer Control; Preset Position Selection - Kenwood DPX503 Manual De Instrucciones

Audio Adjustments
Function of DPX503

X'Over setting

You can set a X'Over value for the speakers;
Adjustment Item Display
Front High Pass Filter "HPF-Front"
Rear High Pass Filter "HPF-Rear"
Low Pass Filter "LPF"
Subwoofer level "SUB-W LEVEL" –15 — +15
Subwoofer Phase "SW PHASE"
1
Enter X'Over setting mode
>
Select "SOUND" "S-SET"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the item you want to set
Turn the Control knob and push the center
when the desired item is displayed.
3
Set the X'Over value
Turn the Control knob.
4
Exit X'Over setting mode
Press the [FNC] button.
Function of DPX503

Equalizer Control

You can adjust following Equalizer Control items ;
Adjustment Item Display
System Q "Preset EQ"
Bass level* "Bass"
Middle level* "Middle"
Treble level* "Treble"
* Source tone memory: Puts the set up value in the
memory per source.
⁄
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Enter Equalizer Control mode
>
Select "SOUND" "S-CTRL"
For how to select Function Control item, refer to
<Function Control> (page 6).
20
|
DPX503/DPX303
Range
Through/40/60/80/100/120/
150/180/220 Hz
Through/40/60/80/100/120/
150/180/220 Hz
50/60/80/100/120/Through
Hz
Reverse (180°)/ Normal (0°)
>
"XOVER".
Range
"NATURAL" (Natural)/ "USER"
(User setting)/ "ROCK" (Rock)/
"POPS" (Pops)/ "EASY" (Easy)/
"TOP40" (Top 40)/ "JAZZ"
(Jazz)/ "GAME" (Game)
–8 — +8
–8 — +8
–8 — +8
>
"EQ".
2
Select the item you want to set
Turn the Control knob.
3
Set the value
Turn the Control knob.
4
Exit Equalizer Control mode
Press the [FNC] button.
Function of DPX503

Preset position selection

According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
Compensation seat
Not compensating.
Front-Left seat
Front-Right seat
Front seat
Calls the value adjusted at <Manual position
setting> (page 21).
1
Enter Position setting mode
>
Select "SOUND" "S-CTRL"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the seat you want to compensate
Turn the Control knob.
3
Exit Position setting mode
Press the [FNC] button.
Range
"All"
"FrontLeft"
"FrontRight"
"FrontAll"
"USER"
> >
"POSIT" "P-POSI".