Ubermann UAG04CHI Manual Del Operador página 29

ANGLE GRINDER SAFETY WARNINGS
• If the use of a guard is recommended for wire brushing,
do not allow any interference of the wire wheel or brush
with the guard. Wire wheel or brush may expand in diameter
due to work load and centrifugal forces.
Additional Safety Rules
• Always use proper guard with grinding wheel. A guard
protects operator from broken wheel fragments.
• Know your power tool. Read operator's manual carefully.
Learn its applications and limitations, as well as the
specific potential hazards related to this power tool.
Following this rule will reduce the risk of electric shock, fire,
or serious injury.
• Always wear eye protection with side shields marked to
comply with ANSI Z87.1 or equivalent standard. Following
this rule will reduce the risk of serious personal injury.
• Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk of
serious personal injury.
• Protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will reduce
the risk of serious personal injury.
• Battery tools do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition.
Be aware of possible hazards when not using your battery
tool or when changing accessories. Following this rule will
reduce the risk of electric shock, fire, or serious personal
injury.
• Do not place battery tools or their batteries near fire or
heat. This will reduce the risk of explosion and possibly injury.
• Do not crush, drop or damage battery pack. Do not use
a battery pack or charger that has been dropped or
received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged battery
immediately.
• Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of serious
personal injury, never use any cordless product in the presence
of open flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
• Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
• For best results, your battery tool should be charged in a
location where the temperature is more than 50°F but less
than 100°F. To reduce the risk of serious personal injury, do
not store outside or in vehicles.
• Under extreme usage or temperature conditions, battery
leakage may occur. If liquid comes in contact with your
skin, wash immediately with soap and water. If liquid gets
into your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention. Following
this rule will reduce the risk of serious personal injury.
• Save these instructions. Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.
6 - English