Product Specifications - Ubermann UAG04CHI Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS

Grinding Wheel Capacity .......................................................4-1/2 in.
Motor ....................................................................................20 Volt DC
ASSEMBLY
Unpacking
This product requires assembly.
• Carefully remove the tool and any accessories from the box.
Make sure that all items listed in the packing list are included.
WARNING:
Items in this Assembly section are not assembled to the product
by the manufacturer and require customer installation. Use of a
product that may have been improperly assembled could result
in serious personal injury.
Do not attempt to modify this product or create accessories or
attachments not recommended for use with this product. Any
such alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal injury.
• Inspect the tool carefully to make sure no breakage or damage
occurred during shipping.
• Do not discard the packing material until you have carefully
inspected and satisfactorily operated the tool.
WARNING:
If any parts are damaged or missing do not operate this product
until the parts are replaced. Use of this product with damaged
or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or
modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the product when
assembling parts.
No Load Speed ...................................... 9,000 /min. (RPM)
Spindle Thread ...........................................................5/8 in. x 11 UNC
Installing Grinding Wheel
See Figure1, page 14.
DANGER:
Use ONLY Type 27 depressed center grinding wheels (such as the
one provided with this product). Never attach a Type 1 straight
or cut-off wheel to this angle grinder. Use for any other purpose
is not recommended and creates a hazard, which will result in
serious injury.
TYPE 27 − OK TO USE
DANGER:
Never attach a wood cutting or carving blade of any type to this
grinder. It is only designed for grinding and sanding. Use for any
other purpose is not recommended and creates a hazard, which
will result in serious injury.
WARNING:
Thoroughly inspect a new grinding wheel before you install it on
the grinder.
• Tap lightly around the wheel using a wooden hammer.
• Listen carefully to the resulting sounds. Places with fissures
or cracks will result in a different sound.
Do not use a wheel containing fissures or cracks.
When you install a new grinding wheel, carry out a no load
revolution test of approximately one minute with the grinding
wheel facing a safe direction, i.e., away from people or objects.
• Depress the spindle lock button and rotate the clamp nut until
the spindle locks.
8 - English
TYPE 1 − DO NOT USE