Installing The Batteries - Nikon Fun Touch 3 Manual De Instrucciones

Installing the Batteries
(1) Open the battery compartment cover by pushing in the direction of the arrow.
(2) Insert two new AA-size alkaline batteries with the correct positive (+) and negative (-)
polarity as indicated by the diagram inside the battery compartment.
(3) Push the battery compartment cover down to close securely.
• Replace the batteries when:
A) The film winding speed is slower than usual.
B) The green LED does not come on within 20 sec. after opening the lens cover.
C) The green LED blinks when pressing the shutter halfway.
A), B) or C) means that the batteries are weak and there may be insufficient power to
operate all the camera's functions.
NOTE:
— Manganese batteries are not powerful enough for correct performance. Ni-Cd
re-chargeable and lithium batteries cannot be used either.
— Remove the batteries from the camera when you do not intend to use it for a number
of months.
— 2 —