Getting Started; Installing The Battery; Checking Battery Power - Nikon Nuvis S 2000 Manual De Instrucciones

Getting started
1
Open the slide cover until it
click-stops.
When closing the slide cover, do
not close it too quickly, as thi s
may damage the lens.
e When the camera is not used for
approx. 2 minutes, the camera turns off
automatically.
(1&
P .17)
Installing the battery
2
Install the battery.
T Open the battery chamber lid.
T Install one 3V lithium battery
CR2 inside the battery chamber
as shown.
T Close the battery chamber lid
until it clicks shut.
eRemember to reset the date and time
when the battery is rep laced.
(1&
PP.30-31)
Checking battery power
..
-
C
Check battery power.
T Open the slide cover to turn the
camera on.
I
e The lens automatical ly extends out to
the W (wideangle) position and the
flash pops up
elf
a low battery power indicator "
ClIIII "
does not appear, battery power is full.
elf
" ClIIII "
bl inks or nothing appears on
the LCD panel, the battery is exhausted
and needs to be replaced.
9