en
For your safety
The accessories are suitable for the food processor MUM5... .
Follow the operating instructions for the food processor MUM5... .
This appliance is suitable for for blending liquid or semi-solid food,
for cutting/chopping raw fruit and vegetables, for puréeing food.
It must not be used for processing other objects or substances.
, Safety instructions for this appliance
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender! Do not remove/attach the
blender until the drive is at a standstill! Operate the assembled blender only
and with the lid attached.
Do not touch blender blades with bare hands.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid. Add
a max. 0.5 litres of hot or frothing liquid.
Important!
The blender must be completely assembled before use. Operate the
blender in the indicated operating position only.
Blender may be damaged. Do not process deep-frozen ingredients (except
ice cubes). Do not operate when empty.
Overview
Please fold out the illustrated pages.
Fig.
1 Blender jug
2
Lid
3
Funnel
Fig.
Operating position
Operating the appliance
Before using the appliance for the first time,
clean all parts of it, see "Cleaning and care".
Important information
In these operating instructions the recommen-
ded reference values for the operating speed
refer to appliances with a 7-setting rotary
switch. For appliances with a 4-setting rotary
switch you can find the values in brackets after
the values for a 7-setting rotary switch.
4
Working with the blender
Press the release button and move
the swivel arm to position 4.
Remove the blender drive cover.
Attach blender jug (mark on the handle
on mark on the base unit) and turn all the
way in an anti-clockwise direction.
Add ingredients.
Maximum capacity – liquid = 1.25 litres;
maximum capacity frothing or hot liquids =
0.5 litres;
optimal processing capacity – solids =
50–100 grams.
Attach the lid and turn anti-clockwise all the
way into the blender handle.
The lid must be locked in position.
Set the rotary switch to the desired setting.
Robert Bosch Hausgeräte GmbH
Fig.