Ice Service Rack (Some Models); Wire Shelf; Vertical Shelf Divider (Some Models); Wire Basket - Kenmore 596 Manual De Uso Y Cuidado

Ice Service Rack (some models)
Install ice service rack by placing ice service rack(A) on
washers(B) and sliding down.
Wire Shelf
Some models feature a fixed wire shelf.
• Remove wire shelf by pulling out. A sharp tug may
be necessary.
• Replace wire shelf by sliding in until back locks in
place.
Some models feature a slide out shelf that pulls forward for
easy access to items in back.
• Remove slideout shelf by sliding forward until ball
point(A) beneath center rail(B)catches in molding
groove.
• Grasp shelf by center rail(B), pull up, and remove.
• Slide in until ball point(A)falls into molding groove.
Vertical Shelf Divider(some models)
Some slideout shelves have an adjustablevertical shelf
divider.
To installdivider:
1. Slide prongs of shelf divider beneath desired grill
work, slightly off-center from center rail.
2. Press top of divider down and slide hook assembly
beneath center rail.
To remove divider:
Press top of divider down and slide hook out from
under center rail.
Pull back on divider to release prongs from grill work.
I c uz,o i°
Make sure shelf is secure before placing items on shelf t
avoid property damage. _._
Wire Basket
Wire basket(A) slides out for easy access to items in back.
Remove wire basket by lifting and pulling out.
Replace wire basket by sliding in.
Tilt-Out Bin (some models)
The tilt-out bin(A) provides convenient storage for frozen
food items in freezer door and tilts forward for easy access
of those items.
A
]5