Setting The Timer With Vcr Plus+ System - Aiwa HV-FX9000U Instrucciones De Manejo

Recording with Instant Timer Recording
(continued)
POWER
wREC/ITR
aPAUSE/STILL
To stop, pause, or turn off the power
while recording
Press s STOP, a PAUSE/STILL or POWER.
To extend the recording duration while
recording
Press w REC/ITR until the new duration you want appears.
Tip
When the regular recording is resumed by pressing w REC/ITR
repeatedly to display "0H00M," Instant Timer Recording is
canceled.
Note
When the tape reaches the end during Instant Timer Recording,
"TIMER" flashes in the display window and the VCR turns the
power off.
21
ENGLISH
sSTOP
Setting the timer with VCR
Plus+ system
You can greatly simplify timer recordings with VCR Plus+
system. Just enter the PlusCode, a number assigned to
each TV program, and the VCR will set the timer recording
automatically. You can find PlusCodes in most TV guide
magazines.
You can set up to 8 programs.
POWER
CLEAR
VCR PLUS+
Before starting
• Check that the VCR clock is set correctly.
• Check that the VCR channel numbers match the guide
channels which assigned to the TV stations.
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• Turn on the VCR and the TV and set the TV for VCR
reception.
• Set the VCR/CATV/DBS/TV selector to VCR.
• If the CATV converter is used for the timer recording,
check that the CATV (or satellite) converter is turned on
and the channel you want to record is selected.
1
Press VCR PLUS+.
2
Enter the PlusCode of the TV program you
want to record using the number buttons.
If you make a mistake, press CLEAR to cancel.
VCR PLUS+ PROGRAM
ENTER VCR PLUSCODE
2 3 6 5 4 3 –
TO CLEAR PRESS
TO ENTER PRESS
TO EXIT PRESS
VCR /CATV/
DBS/ TV
Number
buttons
j/l
i/k
ENTER/DISPLAY
MENU
CLEAR CLEAR
ENTER ENTER
PLUS+ PLUS+