EGO Power+ LM2020SP Manual De Operaciones página 19

2. Move the cutting-height adjustment lever toward the back of the mower for a higher cutting height; move it toward
the front of the mower for a lower cutting height.
3. Once arriving at the desired cutting-height position, engage the cutting-height adjustment lever back into the slot.
TO ATTACH/DETACH THE BATTERY PACK (Fig. 13)
CHARGE BEFORE FIRST USE.
WARNING: If any parts are broken or missing, do not attempt
to attach the battery pack to the mower or operate the mower
until the broken or missing parts are replaced. Failure to do so
could result in serious injury.
1. The battery cover is hinged. Raise the battery cover by
lifting the front of the cover.
2. Align the grooves in the battery pack, with the raised ribs in
the battery compartment, and then insert the battery pack
into the compartment.
3. Push the battery pack until you hear a "click". The battery-
release button will spring up when the battery pack is
securely attached.
4. To detach the battery pack, depress the battery-release button to release the battery pack, and then lift it out of the
compartment.
5. Close the battery cover.
NOTICE: Make sure that the latch on the mower snaps into place and that the battery pack is secured to the mower
before starting operation.
13
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2020SP/LM2020
Battery-Pack Cover
Battery-
Release
Button
19