Beta 1465 Manual De Uso E Instrucciones página 15

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
Pressing "FORWARD" again will allow the state of the battery to be displayed. The "no-load voltage" bar shows the voltage
measured before starting the test, without current absorption, and the state of charge of the battery.
The "under-load voltage" bar shows voltage during maximum current absorption.
The state of health of the battery can now be tracked:
• Both values in the green area -> Positive outcome
• One or more values in the yellow area -> Caution is required
• One or more values in the red area -> Malfunctioning
The absorbed power values depend on both the temperature of the
engine and the internal resistance of the battery. They can be compared
between tests, though only on equal conditions.
The RELATIVE COMPRESSION chart shows the differences between
cylinders. In this case, the results are graded down, so that the cylinders
with the highest compression are at 100% (Max) and can always be
compared to each other.
EN I
15