Technical Data - Beta 1465 Manual De Uso E Instrucciones

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
- Do not wear loose clothing, jewellery or metal objects when working on the motor vehicle.
- Clean the battery terminals, preventing corrosive agents from coming into contact with the skin or eyes.
ENGINE EFFICIENCY TESTER USE AND CARE
- Do not use the engine efficiency tester if the case, the clamps, the cables or the power supply cable have been damaged, if it
gives off unusual smells or too much heat.
- Do not modify the engine efficiency tester. This can reduce the effectiveness of safety measures and increase operator risk.
- Have the engine efficiency tester repaired only through a trained repair person and only using original replacement parts.
- Do not use the engine efficiency tester with any voltages other than those stated in the TECHNICAL DATA table.
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING ENGINE EFFICIENCY TESTER
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR SAFETY SHOES
ALWAYS WEAR EYE PROTECTION
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING TOOL
Additional personal protective equipment to wear according to the values found in the environmental
hygiene/risk analysis survey if the values exceed the limits under current regulations.

TECHNICAL DATA

OPERATING VOLTAGE
STORAGE TEMPERATURE
DIMENSIONS
CLAMP CABLE LENGTH
WEIGHT
12VDC (motor vehicle battery)
5 °C – 50 °C
140x75x30 mm
1.3 m
0.215 kg
EN I
11