Fitting The Storage Shelf; Fitting The Side Panels; Assembling A Kombi Hexagon Workbench - Garant KOMPAKT Manual De Instrucciones

4.3.2

Fitting the storage shelf

The side faces of the support cross braces carry holes for securing the
storage shelf.
DE
Position the storage shelf
X
between the cross braces
on the supports, and screw
it on.
Tighten the screws on the
X
support legs.
EN
4.3.3

Fitting the side panels

The inner faces of the support legs carry holes for securing the side panels.
Stand the workbench back
X
on its feet.
Position the side panel
X
FR
between the support legs
and screw it on.
IT
ES
30
4.4.

Assembling a KOMBI hexagon workbench

Position all drawer unit shells as shown on the dimensioned drawing.
X
Place both halves of the
X
worktop on the drawer unit
shells.
Precisely position the joint
X
cover strips.
Insert the connector clips
X
and tighten the screws.
Align all the drawer unit
X
shells.
Maintain the correct
X
projection of the worktop
at the tops of all drawer
unit shells.
www.hoffmann-group.com
30 mm
DE
EN
FR
IT
ES
31