Battery; Commissioning; Initial Commissioning; Installing The Battery - Garant 93 1401-93 4317 Manual De Uso

GARANT Workbench with electric height adjustment

3.9.2. Battery

 Store in a place that is as cool as possible but frost-free.
en
 Remove the battery from the workbench, store it in an enclosed dry room.
 Store the battery in its closed and undamaged original packaging.
 Always store the battery upright, not on its side or overhead.
 Keep fully charged when in store.
 Every six months, recharge the battery to 75 % state of charge.
i
Reduction of the charge capacity of the battery due to cumulative ageing in use.

4. Commissioning

4.1. INITIAL COMMISSIONING

Mobile workbench with battery (Art. No. 924611 - 924617)

4.1.1. Installing the battery

A
(Fig. )
i
Only an electrician may install the battery.
1. Open the original packaging.
2. Grip the battery by the carrying handles and take it out.
» Keep the original packaging for subsequent storage and transport.
3. Open the side compartment.
4. Place the battery in the side compartment.
» Ensure adequate circulation of air. Check the distance from the rear panel.
5. Plug the mains cable supplied into the 230 V-AC input connection on the rear face of the bat-
tery.
6. Insert the mains plug for the control module into the 230 V-AC output connection on the front
face of the battery.

4.1.2. Charging the battery

B
(Fig. )
1. Insert the mains plug into a mains socket.
2. The battery is being charged and can be used whilst charging is in progress.

4.1.3. Switching the battery on

C
(Fig. )
1. Keep the power button depressed.
» The start menu will appear.
» POWER is pre-selected.
2. Confirm with OK.

4.1.4. Switching the battery off

D
(Fig. )
46 Instruction manual