Contents
1
2
3
4
5
6
7
8
9
11.1.2 9-channel mode . . . . . . . . . . . 21
14
LED Moving Head
These instructions are intended for users with
basic knowledge in DMX control . Please read
these instructions carefully prior to operating the
unit and keep them for later reference .
All operating elements and connections
described can be found on the fold-out page 3 .
1 Operating Elements and
Connections
1 Infrared sensor for remote control
2 Control buttons
MENU to call up the menu, to select a menu
item or to exit a submenu
,
to select a menu item or to change
a setting
ENTER to call up a submenu, to save a set-
ting changed
3 Display
4 DMX input (XLR) for connection of a DMX
light controller or for connection to the DMX
output of a different DMX-controlled unit
5 DMX output (XLR) for connection to the DMX
input of another DMX-controlled unit
6 Mains jack for connection to a socket
(230 V~/ 50 Hz) via the mains cable supplied
7 Support for the mains fuse
Always replace a blown fuse by one of the
same type .
8 Mounting bracket
9 Holes for attaching the mounting bracket (8)