1-2 Checking the Package Contents
Open the box and check that nothing is missing.
ELPMB22 ceiling mount
Offset wrench
Hexagon wrench
• Only use the projector mounting screws provided to install the projector plate onto
the projector.
• Prepare the necessary tools before starting.
1-3 Names of Parts
ELPMB22
Tilt adjusting screw/
screw cap
Ball joint
Lens alignment
screws (4 pcs.)
ELPMB23
Tilt adjusting screw/
Lens alignment
screws (4 pcs.)
4
ELPMB23 ceiling mount
Projector mounting
screws: 4 pcs. (M4 × 12)/
lock washers: 4 pcs./
plain washers: 4 pcs.
screw cap
Ball joint
Instruction manual
(this manual)
Ceiling plate
Plate securing screws
(2 pcs.)
Tilt fixing screws (2 pcs.)
Projector plate
Ceiling plate
Plate securing screws
(2 pcs.)
Tilt fixing screws (2 pcs.)
Projector plate