Elmo TT-02RX Manual De Instrucciones página 15

Name
(1)
POWER
(POWER ON/OFF
standby status)
(2) OSD
MENU
Operation
P.19
(3)
(Direction)
(4)
(Enter)
(5)
(Pause)
(6)
(Image save)
Function
To turn the power (7) Image
ON/OFF.
Power ON:
Blue lamp
Power OFF
standby status:
Red lamp
To show/hide the (8)
OSD menu.
The LEDs for op-
eration buttons are
not lit during OSD
menu display.
P.19
To select an OSD (9)
menu item.
To decide the (10) Bright-
OSD item.
To pause the (11)
camera image.
Press this button
again to restart.
(12) SD
To save the im-
age on the SD
card.
P.37
(13)
(14)
English
Name
select
(SD mode)
(CAMERA)
(PC)
ness
Adjust
mode
operation
Function
To switch the output
image to images
stored on the SD
card.
The SD Mode LED
is lit in SD Mode.
P.54
To switch the output
image to camera
image.
The LED is lit in
CAMERA mode.
P.54
To switch the output
image to the image
input to RGB IN.
The LED is lit in PC
mode.
P.54
To brighten the
camera image.
P.53
To darken the
camera image.
P.53
Single Display:
Return to the pre-
vious image
4x4 Display:
Move the cursor
to the previous
image
Single Display:
Move to the next
image
4x4 Display:
Move the cursor
to the next image
Change between
Single Display
and 4x4 Display.
1